Just 3 in 1 machine

MESIN 3 IN 1

LET'S TO TRY BESIDE HAVE A JOB OUT SIDE

Instruction of Multifunction Heat Press Transfer

Mug Transfer	Plate Transfer	Key Chain Transfer	Mouse Pad Transfer

1) Use Photoshop, Illustrator, CorelDraw or others software to edit image

2)Use (Epson C88) sublimation ink to print images on the shiny side of sublimation transfer paper. Set printing setups to "Mirror Image", "Best Photo", "Plain paper". Wait until the ink dries and then make the transfer.

3)Changing heat press part, make sure the connection is correct and tight 4)Adjust pressure, turn the knob at bottom of the machine. Use medial pressure and not too tight, for mug and plate, which may otherwise break when heating if the pressure was too high

5)Cut the image

6)For mug: Tape image to the mug using small pieces of tape on each side of the transfer, When cutting the transfer to fit the mug, be sure to leave ¼" on the top and bottom of mug and ½" on the left and right of the handle. Wrap mug and transfer with Teflon sheet. Set temperature and timer to 180C and 50 Sec Plate: Put image on the centre of plate and then cover Teflon sheet. Set temperature and timer to 200C,100Sec Key Chain: Put high temperature rubber under key Chain, put transfer on key Chain then cover a small rubber. doing that is to keep flat level, When transfer. Set temperature and timer : 210C, 100Sec Mouse pad: Put transfer on desired place then cover Teflon sheet. Set temperature and timer :200C, 20Sec * These are not absolute temperatures and times. You will have to do adjust for different objects when doing actually transfers.

7) Mug, Plate, Key Chain: Push down the press handle and turn on power switch. Press “timer stop” button to stop timer count and the temperature of heater will start to rise. When the actual temperature reached set temperature, the timer becomes active will start counting. When the timer reached set second, the buzzer sounds. Turn off the power, lift the handle and remove the object. Waiting 20 second or more before peeling the transfer paper. If you peel the transfer paper too early, before the transfer process is complete, the image may be easily ruined. Mouse pad: Turn on power switch. Wait until the temperature reach the set temperature, close the handle and click the power switch( fast turn off then turn on power switch one time). The timer will start to count. When the buzzer sounds, open handle and peel transfer paper.

The multifunctional machine can used on a variety of stuffs. Signs, Apparel, Weddings, Glass Plaques, Memory Boxes, Tote Bags, Car Flags, Coffee Mugs, Key Chains Place Mats, Switch Covers, Mouse Pads, Coasters